Fingerprint and card reader user manual 3 chapter 1 2introduction 1.1 product overview fingerprint and card reader is a kind of high-performance product, with a 32 bit high-speed processor. it communicates with access controller via the rs-485 protocol. and a built-in tamper-proof module helps to protect card reader from malicious damage.. User manual; nitgen nac-5000 user manual. fingerprint access controller. fingerprint reading scan fingerprints as described below for fingerprint registration and authentication to prevent authentication errors. ① maximize the finger area scanned and press evenly (70 ~ 80% of full pressure). ② place the “core” of the fingerprint at. User manual rev: e2.1.0 - 2 - content get the enroll info from device to the software, including the fingerprint, password, rfid card info and save it in the software database. 6) upload username upload employee’s name from software to the device. you could modify the employee’s.
Desktop-styled attendance machine user manual v1.0 fingerprint card. dup fpcard: copy the fingerprint in card into fingerprint machine. after copying, you can use the fingerprint to authenticate. move to fpcard: move the fingerprint in fingerprint machine into the fingerprint card, then the fingerprint is only saved in card and not in. User manual this manual is applicable to card reader. the manual includes instructions for using and managing the product. pictures, charts, images and all other information hereinafter are for description and explanation only. the information contained in the manual is. F18 user manual v1.0 press / to select “only copy user information” or “copy user information and fingerprint”, and then press ok. 2.3.5 set card parameter value set password of mifare card and decide whether the information should be saved or not..
